Pages

Saturday, June 5, 2021

Focke-Wulf Fw 190 D-9 | 1/12 th Scale | Part 25 – Armor plates

Dry fitting of parts is actually quite okay....
I made a jig for mounting the seat rails
from MDF and a styrene strip
that slides into the C-profile:
I cut paper templates of the armor plates
to get the diminsions right ...
I then cut the plates from 0.5 mm alu sheet,
the alu is quite soft which makes it
tricky to cut and drill. Parts need to be
polished and cleaned.

No comments:

Post a Comment