 |
| Jig for the center fuselage section. Built from MDF and balsa. |
 |
| Frames marked on the jig. I also cut some frames from MDF as templates. |
 |
| Designing the roof of the luggage compartment. |
 |
| Making a tool for shaping the panel. |
 |
| Basic shaping of the panel is done. Some areas had to be annealed four times. |
 |
| Dryfitting of the panel. |
 |
| Right side view. More bending to come. |
 |
| Sides bent dowwn to allow for mounting the canopy rails. |
 |
| Tool for making frame 6. |
 |
| Upper segment of frame 6 in place. |
 |
| Some details still missing. |
 |
| Dry fitting looks OK. |
 |
| Picture shows the shape to good advantage. |
