Focke-Wulf Fw 190 D-9 | 1/12 th Scale | Part Seven – First metal work: joggle joints

The fuselage extension plug is made of 2 shells: left and right. The right shell overlaps the left one in a joggle joint at the spine and bottom.

A: Material defining the height of the joggle joint. In this case 0.15 mm
B: Shell plating of 0.15 mm litho plate for the left side.
C: Stop block for D.
D: Embossing tool for the joggle joint

0.15 mm isn´t very much, but it is there! ;-)

Macro of the joggle joint. The right shell will overlap the recessed portion.