|Jig for the center fuselage section. Built from MDF and balsa.|
|Frames marked on the jig. I also cut some frames|
from MDF as templates.
|Designing the roof of the luggage compartment.|
|Making a tool for shaping the panel.|
|Basic shaping of the panel is done. Some areas had|
to be annealed four times.
|Dryfitting of the panel.|
|Right side view. More bending to come.|
|Sides bent dowwn to allow for mounting|
the canopy rails.
|Tool for making frame 6.|
|Upper segment of frame 6 in place.|
|Some details still missing.|
|Dry fitting looks OK.|
|Picture shows the shape to good advantage.|