Saturday, October 15, 2016

Focke-Wulf Fw 190 D-9 | 1/12 th Scale | Part Three – Center Fuselage section and fuel tank chamber

I cut frame 1 Motoranschlussspant from 2mm plywood
for its greater strength over MDF.

Cockpit floor (frame 1 to 5) and
luggage compartment (frame 5 zo 8).

I added balsa blocks cut from 8 mm board
between the MDF frames.

Dry fitting of the jack up pipe from 5x4 mm alu pipe.

No comments:

Post a Comment